Smart Solutions
Support
DOCUMENTS
Features
- Battery powered design runs on 4 "AA" batteries
- Extremely long 2 year battery life
- Supports Z-Wave FLiRS functionality
- Works on heat pump HVAC systems: 3 stage heat/ 2 stage cool
- USB firmware upgrade ability
- Can be powered by 24 VAC "C" wire from HVAC system
- Z-Wave compatible - Ver. 4.5.5
- Works on standard HVAC systems: 2 stage heat/ 2 stage cool
- Incredibly easy to install and program
- Wall mount or mounts on single-gang junction box
Battery Powered Z-Wave Thermostat
Model GC-TBZ48 is a battery powered Z-wave thermostat that connects to all Z-Wave hubs, including the 2GIG GC2 panel giving you control over your home’s comfort wherever you are. This model is designed to be incredibly easy to install and includes a front loading battery compartment to hold 4 “AA” batteries to power the thermostat for two full years, or it can be powered by the HVAC systems 24 VAC “C” wire. The 7 character scrolling display makes programming simple.
The GC-TBZ48 works with most contemporary Central HVAC systems, whether standard or heat pump, which makes this thermostat a great solution for all retrofit or new construction needs.
Re-Key to any KW1 Keyway Key
While re-keying your door lock is not a requirement of lock installation, SmartKey allows you to quickly and easily reset your lock’s cylinder to work with any KW1 Keyway key.
Frequently Asked Questions
QUESTIONS
1. Press program button once
2. Press button ‘A’ once
3. Press button ‘9-0’ once.
4. Press button once that corresponds to desired time delay:
‘1-2’ = 30 sec
‘3-4’ = 60 sec
‘5-6’ = 90 sec
‘7-8” = 120 sec
‘9-0’ = 180 sec
5. Press lock button once
1. Press program button once
2. Press button ‘A’ once
3. Press button ‘3-4’ multiple times if needed to reach desired state. Green lock button means feature is enabled. Red lock button means feature is disabled.
4. Press lock button once.
How to mute/unmute audio
1. Press program button once.
2. Press button ‘A’ once.
3. Press button ‘5-6’ multiple times. If needed to reach desired stat. Green lock button means feature is enabled. Red lock button means feature is disabled.
4. Press Lock button once
1. Remove battery pack.
2. Press and HOLD the program button while reinserting the battery pack. Release button once battery pack is installed. The status LED will flash red and green.
3. Press the program button once more.
4. The latch bolt will extend and retract to learn the orientation of the door.
The Status LED will indication success or failure
Success: flashes green
Failure: flashes red
The status LED blinks every 6 seconds to communicate whether the door is locked or unlocked. This feature is on by default.
Turn Status LED on/off
1. Press programming button once
2. Press button ‘A’ once.
3. Press button ‘1-2’ multiple times if needed to reach desired state. Green lock button means feature is enabled. Red lock button means feature is diabled.
4. Press lock button once.
1. No user code programmed. Program at least one user code.
2. Either programming timeout after five seconds or unsuccessful programming. You should attempt the programming procedure again.
Reviews and Q&As
There are no reviews yet. Be the first one to write one.
Device Type
Thermostat Conventional
Manufacturer
GoControl
Base Model Number
GC-TBZ48
Communication Protocol
Z-Wave Plus
Z-Wave Security Protocol
None
Model/Description
Battery Powered Z-Wave Thermostat
Manufacturer product page
Device Manual
Thermostat
